4" LM Digital Switch Pressure Gauges

Product Introduction
  • LM Digital Switch Pressure Gauges
  • LM Digital Switch Pressure Gauges
SDI04-L4" LM Digital Switch Pressure Gauges
Description
  • High precision at ±0.5%
  • Backlight display; Zero reset; Switching between 8 types of units Psi, Bar, kg/cm2, Kpa, Mpa, in-Hg, cm-Hg, Atm
  • AISI Stainless Steel 17-4PH one-piece-formed sensor, 100% without welds, O-ring or silicone oil; 100% leakage-proof.
  • SUS304 casing, can be used in weak acid or alkaline environment.
  • Incorporating RS485 communication, allows in-house monitoring.
  • Capable of -10~60°C temperature compensation.
  • Capable of Peak-Hold.
  • Diaphragm Base installable
  • 4 setting of I.O output; 8 setting of Higher limit (H) and Lower limit (L)
  • Burst pressure : 5X
  • Pressure overload : 2X
  • Service life : 10 million
Product Specification
DIMENSION 100mm
ACCURACY ±0.5% F.S.
FLUIDS SUITED Water, Air, Hydraulic fluid
PRESSURE RANGE   -1~700 BAR
TEMPERATURE Working temp -20~85°C (non-frozen condition)
Compensation temp 0~55°C (non-frozen condition)
Storage humidity 35~85%
CONNECTORS 1/2" PT.NPT or other
Brass Alloy. LM or LBM
DIGIT SIN DISPLAY 4-1/2-digit LCD. WINDOW 28X68mm
CASE SUS304
DIAL PC
SUPPLY VOLTAGE DC: 12V~24V
CURRENT DRAWN Max:150mA (single back-light)
Not include control output drawn
CONTROL OUTPUT 4 setting of output: NPN/PNP-Open Collector
Load current: <100mA
Voltage (NPN): Max DC30V
Voltage (PNP): Max supplied voltage
 COMMUNICATION RS485 (RTU MODE)
ADDITION SS Diaphragm Base
PP Diaphragm Base
Back